Friday, November 30, 2012

Intel 'preparing' to put an end to user-replaceable CPUs

This is quoted from http://www.zdnet.com/intel-preparing-to-put-an-end-to-user-replaceable-cpus-7000008024/ .


Intel 'preparing' to put an end to user-replaceable CPUs

Summary: Reports suggest that Intel is preparing to kill off PC upgrades by adopting the BGA rather than an LGA package for its upcoming Broadwell architecture processors. This is the beginning of the end for the desktop PC.
Adrian Kingsley-Hughes
By for Hardware 2.0 |


Yesterday, a report emerged claiming that Intel is planning to release its upcoming 14-nanometer Broadwell architecture processors as a ball grid array (BGA) rather than an land grid array (LGA) package.
This would have several widespread implications, including bringing to an end to processor (CPU) upgrades.
Traditionally, the processors in desktop systems are fitted into a socket on the motherboard that allows them to be removed and replaced, while systems such as notebooks and tablets have the CPU soldered onto the motherboard.
At present, Intel uses the LGA package design, which allows the processor to either be fitted into a socket or soldered directly to a motherboard. This gives the OEM down the line options as to how to mount the processor onto the motherboard.
A switch to BGA would mean that the processor could no longer be fitted into socket where it could be removed or replaced, and instead would be soldered to the motherboard much like processors for notebooks and tablets are nowadays.
The rumor that Intel was planning a switch from LGA to BGA has been circulating for months, but earlier this week Japanese tech site PC Watch (translation here) was the first to break the news.
I have now independent confirmation from a PC building OEM, who declined to be named, along with two motherboard makers, that Intel has briefed them of the switch from LGA to BGA for Broadwell architecture processors, which are expected to make an appearance next year.
Separately, tech site SemiAccurate has also received confirmation from two unnamed PC OEMs.

Why the switch?
First and foremost, at least from Intel's point of view, is that this move puts the chip giant in an even more commanding position, allowing it greater control over the motherboard market. More control means more money.
While it doesn't seen that Intel wants to cut existing motherboard makers out of the equation just yet, sources I have spoken to seem to be worried that this could happen in the mid-to-long-term.
The vast array of motherboard choices that both enthusiasts and OEMs currently enjoy could be a thing of the past in a couple of years.
It's a move that could make PC OEMs happy too. Soldering a component to a motherboard is cheaper than soldering a socket and then fitting that processor into the socket. The difference might only be pennies, but spread over millions of PCs, those pennies add up.
As far as the PC OEMs are concerned, killing off the PC upgrade market would be a good thing because it would push people to buy new PCs rather than upgrade their existing hardware. The PC industry is currently stagnant, partly because consumers and enterprise are making existing hardware last longer.
The casualties of this move will be upgraders and PC 'modders', the huge market that exists around them. While not many people bother to upgrade their PCs, instead choosing to buy a new one, the market is large enough to support countless manufacturers and vendors. This move by Intel would be the final nail in the coffin for this industry, taking down a number of players. This, unfortunately, would have a corresponding knock-on effect on jobs.
Intel wins. OEMS win. People wanting cheap PCs win. But there are a lot of losers.
According to SemiAccurate, the successor of the Broadwell architecture, called Skylake, will bring back a socketed CPU, "for a generation, possibly two," but I have not been able to confirm this independently.
It seems that this is the beginning of the end for upgrades, and not just CPU upgrades. Apple is already soldering RAM onto the motherboards of its MacBook Pro systems.
This feels to me like the beginning of the end for the desktop PC. Modularity made the desktop PC, and removing this key feature will break it.

 

Have you ever used Microsoft Surface Pro? Do you like it? South Korea is not yet. Will a Microsoft Surface Pro run all windows software? Any problems?

Have you ever used Microsoft Surface Pro? Do you like it? South Korea is not yet. Will a Microsoft Surface Pro run all windows software? Any problems?

Wednesday, November 28, 2012

The Winter Olympics Games history(Poster, Logo, Mascot, Medal, Stamp) of from 1924 to 2010 video. 1924年から2010年までの冬季オリンピック歴史(ポスター, ロゴ, マスコット, メダル, スタンプ) 映像.

The Winter Olympics Games history(Poster, Logo, Mascot, Medal, Stamp) of from 1924 to 2010 video. 1924年から2010年までの冬季オリンピック歴史(ポスター, ロゴ, マスコット, メダル, スタンプ) 映像.

This photos is quoted from https://www.google.com .

この写真の出処はhttps://www.google.comです.

Tuesday, November 20, 2012

The Summer Olympics Games history(Poster, Logo, Mascot, Medal, Stamp) of from 1896 to 2012 video. 1896年から2012年までの夏季オリンピック歴史(ポスター, ロゴ, マスコット, メダル, スタンプ) 映像.

The Summer Olympics Games history(Poster, Logo, Mascot, Medal, Stamp) of from 1896 to 2012 video. 1896年から2012年までの夏季オリンピック歴史(ポスター, ロゴ, マスコット, メダル, スタンプ) 映像.

This photos is quoted from https://www.google.com .

この写真の出処はhttps://www.google.comです.

Where is the Apache Software Foundation Official facebook? I think Apache Software Foundation is don't operates Official facebook yet. アパッチ ソフトウェア財団のオフィシャルフェイスブックどこにありますか? 私の意見ではアパッチ ソフトウェア財団はまだオフィシャルフェイスブックを運営しないみたいだ

Where is the Apache Software Foundation Official facebook? I think Apache Software Foundation is don't operates Official facebook yet.

アパッチ ソフトウェア財団のオフィシャルフェイスブックどこにありますか? 私の意見ではアパッチ ソフトウェア財団はまだオフィシャルフェイスブックを運営しないみたいだ

Thursday, November 15, 2012

The Jet Car from Buckaroo Banzai – 3D Printed!

This is quoted from http://blog.objet.com/2012/11/07/the-jet-car-from-buckaroo-banzai-3d-printed/ .

The Jet Car from Buckaroo Banzai – 3D Printed!




I think I must have just missed this growing up. But judging by the trailer, it looks like a cult hit. Our famous Octopod artist, Sean Charlesworth (who’s undergrad was in Film and TV by small chance!) has now used his Objet Connex multi-material 3D printer to re-create the iconic Jet Car from the film.
Another incredible job from Sean! Check out his fantastic model below:
3D Printed Jet Car
Wireframe of the Objet 3D Printed Jet Car – by Sean Charlesworth

And now for the 3D printed model:
3D Printed Jet Car
Objet 3D Printed Jet Car in Rigid Gray Material
 
How about some close-up’s to show the detail of the jet?
3D Printed Jet Car
Objet 3D Printed Jet Car in Rigid Gray Material – Back View

And here we can clearly see the tire treads in this underside shot:
3D Printed Jet Car
Objet 3D Printed Jet Car – Underside with Detail of Tire Treads

 

The Claw! Created on an Objet 3D Printer

This is quoted from http://blog.objet.com/2012/10/31/the-claw-created-on-an-objet-3d-printer/ .

The Claw! Created on an Objet 3D Printer

3D Printer Cubify Cube Client Software Available for Macs

This is quoted from http://blog.3dsystems.com/2012/11/cubify-client-software-available-for.html .

November 14, 2012


Cubify Client Software Available for Macs

Cubify Client Software is officially compatible with Macs. Mac users are able to start designing their own .STL creations and print on the Cube. For more information, check out our press release! Now everyone can design and print on the Cube. Happy printing mac lovers!

3D Printer related Video 9












Thursday, November 8, 2012

Nature, Landscape, Animal, Humanism, Humor photo video 4, 自然, 景色, 動物, ヒューマニズム, ユーモア 写真 映像 4

This photos is quoted from https://www.facebook.com/WorldwideCollection .

この写真の出処はhttps://www.facebook.com/WorldwideCollectionです.